AAXA Technologies P3 Pico - Proyector (50 lúmenes ANSI, LCOS, WSVGA (1024x576), 15000h, LED, Manual) Negro
- Altavoces incorporados
- Kensington lock
- Mando a distancia
- Tecnología de proyección: LCOS
- Tipo de ranura, CardBus PCMCIA
Hay un nuevo modelo de este producto:
Descripción del producto
Alta Definición Total: No
Altavoces incorporados: Si
Altura: 3,1 cm
Ancho: 11,6 cm
Brillo de proyector: 50 lúmenes ANSI
Cables incluidos: Compuesto, USB, VGA
Cantidad de puertos USB 2.0: 1
Cantidad de puertos VGA (D-Sub): 1
Certificación: CE, FCC A
Color del producto: Negro
Compatibilidad 3D: No
Compatibilidad de tamaño de pantalla: 177,8 - 2032 mm (7 - 80")
Consumo energético: 11,5W
Duración de lámpara: 15000h
Entrada auxiliar: No
Entrada de video compuesto: 1
Factor de forma: Portátil
Formatos de imagen soportados: JPG
Formatos de vídeo compatibles: AVI, MP4, MPG, RM, RMVB
Formatos gráficos soportados: 1024 x 576 (WSVGA), 1280 x 800 (WXGA)
Fuente de energía: Batería
HD Listo: Si
Mando a distancia: Si
Nivel de ruido: 30 Db
Número de altavoces incorporados: 1
Número de puertos HDMI: 1
Pantalla incorporada: No
Potencia estimada RMS: 1W
Preparado para 3D: No
Profundidad: 6,6 cm
Puerto DVI: No
Ranura para cable de seguridad: No
Razón de contraste (típica): 1000:1
Relaciones de aspecto compatibles: 16:9, 16:10
Relación de aspecto nativa: 16:9
Requisitos de energía: 5V 3.0A DC
Resolución original del proyector: WSVGA (1024x576)
Salidas para auriculares: 1
Sintonizador de TV integrado: No
Tarjeta de lectura integrada: No
Tarjetas de memoria compatibles: No
Tecnología de batería: Ión de litio
Tecnología de proyección: LCOS
Tipo de lámpara: LED
Tipo de ranura, CardBus PCMCIA: No
Tipo de reproductor de disco óptico: No se incluye
Trípode montable: Si
Opiniones de clientes
Opiniones de clientes más útiles en Amazon.com (beta)
No way was I going to get the Micro-vision again. So I started looking around again. This time I know that 20 lumens the micro vision had was not enough. I also wanted HDMI. So I decided on the AAXA projector. What a good choice it turned out to be. It was about tripple the size of the Microvision but still small about the size of two decks of cards. The bigger size was not a problem due to the image quality. It was so much better than the Microvision I could not belive my eyes. It had better controls, brighter more connections and all the cable came with it. One feature you cannot do without is a tripod mount on a projector this size. The cables are heavier than the projector and it will move all over the place without a tripod to stabilize it. The Microvision did not have a tripod and that was a terrible oversight on the manufacturers part.
I hook this up to watch movies off my ipod to play games with my ipad. It hooks up to my video camera, my digital camera and even my playstation. Anything that has a video out will work with this projector. It is also over $100 cheaper than the Microvision. You will not be disappointed.
Since just recently amending my review, my AAXA P3 is now periodically displaying white vertical lines on the bottom half of the display so the device has now officially broken within 8 months. Although, I will be returning this device to AAXA under warranty, I now have TWO broken micro projectors from different manufacturers which are useless in less than two years at a cost of $550. My original suspicions have been confirmed: micro projectors just can't withstand luminosity levels greater than ~ 25 lumen for more than ~ 45 minutes at a time without premature failure due to the heat. I treated AAXA's P3 like a baby and always allowed it to cool after every few hours of use. In the future, I won't pay attention to any review of any micro projector without the owner first using the device for a minimum of two years. My rating of AAXA's P3 now plunges to 1 since I was able to use the device for 8 months.
Good luck with your decision.
The unit is solidly-build and very light and comes with a small tripod and accessory cables (excluding HDMI, of course). After unboxing, I connected the unit to a laptop via HDMI and fired it up. Given the specs that the max input is 720P, I was surprised to see it scale and handle the 1080p input from the laptop flawlessly. I had the unit in a moderately-lit room and was using a standard, 72 inch wide DaLite white screen (72 inches wide). At about 36 inches wide, the image was much brighter than I expected and text, graphics, and spreadsheets were crisp with good color saturation. At 72 inches wide, the image was, of course, dimmer, but still very readable and reasonably bright. The focus lever is a little "notchy," but with practice, it is possible to get a very precise focus with this projector. There was one drawback that might affect people who are sensitive to the effect--rainbows. Although this is a three-LED LCOS (not DLP) projector, it does produce a rainbow effect of you move your eyes rapidly back and forth across the screen. The effect is not pronounced and it did not bother me; others may find it troublesome.
For all my tests, I used the supplied power supply to ensure maximum brightness.
I have a large, home theater projector and I thought I might see how this unit stacked up as a movie player. I set up in a moderately dark room and adjusted for the full 72 inch width. I fed the projector a variety of 1080P material and make the following observations:
The internal speaker is almost useless, with very low level sound. Feed sound directly from the source or from the output on the projector to an amplified speaker or HT audio setup for best results.
The image is superb if you take some time to set and focus precisely. I used the "standard" setting, but turned off noise reduction and set the color temperature to "cool," which gave excellent flesh tones (on the default setting, skin tones were slightly greenish). I took pix of the screen to capture just how good this unit is, but unfortunately, i can't post them here. Some reviewers have written of "muted" colors. To me, they seemed natural and well-saturated. Detail is pretty much what you would expect from a projector with close to 720p resolution: there was lots of it, it was well-rendered, and the LCOS engine produced almost no visible pixels even when the image was viewed 3 feet from the screen.
Shadow detail was pleasing and I saw no evidence of macro-blocking; smearing was on a par with a decent flat-panel. The built-in media player handled pretty much everything I threw at it and decoded 1080P very will with smooth motion rendition. More importantly, in a reasonably dark (but not fully dark) environment, image brightness was simply not an issue for me or for the members of my family that I recruited to help me with the tests. I've set up a second, smaller theater room, using this projector as the source; we can now have 2 feature presentations.
Overall, this is a very worthwhile investment for someone needing a portable and surprisingly bright, detailed projector for presentations. If you're thinking of a second home theater (or you just want a very inexpensive way to get into it), you can buy this little gem for about the price of a bulb in a large size HT projector.
I highly recommend this product.
Very easy to use and would do it again.
Image quality is excellent. Focusing is a bit tricky but you get the hang of it very quickly. The fan is quiet, turn-on time is about 8 seconds.
This projector produces a very bright 32-40" image in my brightly-lit living room. At night you can make the image bigger but you'll have to dim down the lights.
You can set it to project inverse and upside-down images, so mounting possibilities are plenty. However, it does NOT have any kind of trapezoidal setup so you have to make sure the projector is as flat as possible.
All in all, I am very happy with the P3. Use it to amaze and entertain a couple of friends and you'll be happy too. :-)