Cooler Master Hyper 212 Plus - Ventilador de PC (Procesador, Radiador, Negro, Gris, Aluminio, 120 x 79,7 x 158,5 mm)
Los clientes que vieron este producto también vieron
Descripción del producto
Adecuado para: Procesador
Color del producto: Negro, Gris
Dimensiones (Ancho x Profundidad x Altura): 120 x 79,7 x 158,5 mm
Diámetro de ventilador: 12 cm
Duración del producto: 40000 h
Velocidad de rotación: 2000 RPM
Ventilación: 21.2 - 76.8 CFM
Opiniones de clientes
Principales opiniones de clientes
calidad precio indiscutible me mantiene el micro en 25 º C en idle y jugando en 43º C
Opiniones de clientes más útiles en Amazon.com (beta) (Puede incluir opiniones del Programa de Recompensas de Opiniones Iniciales)
Get a second fan. It will make things even quieter, because they'll run slower for the same amount of airflow.
Just be aware it's FRIGGING HUGE. It's 4 inches wide, 5 inches tall, and with both fans installed it is almost 4 inches thick. It won't fit in every case, so measure first. If it will fit, you won't be disappointed.
Installing it is a piece of cake and the instructions are very easy to follow in case if you have never installed a heatsink before.
There are also videos on YouTube that you could watch that show step by step of how to install a heatsinnk.
The performance of this heatsink is excellent. I installed this heatsink to my 3770K CPU and temps were running 43C idle with stock heatsink. After applying the Hyper 212+, the temps dropped to 34C idle so that's a big difference and I have a lot of headroom for overclocking. I plan on overclocking my 3770K to 4.4Ghz but I need to do more testing for that.
It comes with a 120mm fan attached pre-installed onto the heatsink and the metal clips make it very easy to remove the fan for heatsink. You also have an extra two metal clips in case you would want to add a second fan for more airflow. When it comes to noise, this beast is very quiet and does a good job at staying quiet even under full load. The Hyper 212+ comes with its own thermal paste which is decent but not the best one out there.
Pros: Excellent price/performance ratio | huge drop in load temp | quieter than stock
Cons: Huge- might interfere with ram, video cards, mosfet coolers, case side panel | not silent | pain to install if motherboard tray doesn't have a cut out
Note: I used Gelid Solutions GC-Extreme Thermal Compound TC-GC-03-A on this heatsink, I did not compare it to the included paste but I imagine the difference would be at most only a couple of degrees.
I'm taking a star away from all CPU fans from here to eternity tho -- at least until they start shipping the bloody things with BOTH fans (in all of them, forever). Case manufacturers (often the same people) annoy me with this move of "fan expansion slots!" too, but in this case what you are buying IS the bloody fan!
It just annoys the hell out of me.
That said, I heard since I bought this they do, in fact, have a model that has both fans -- but I didn't know that . . . .and I do still kinda blame them for that, regardless if I should.
So -- my petty peeves aside, this thing is worth the money, get it if you can, don't if you want to overclock. It handles my 8-core just fine so. . .yeah, unless you OC you won't need better, and by that point you'd be better with water cooling anyway. . . .
If you have Mini Tower, chances are this 212+ (and the EVO) will be too big, and you may want to consider the Cooler Master TX3 instead. The TX3 has only a 92mm fan, and is closer to 4" high. Plus, if you have a mini tower, this is probably more cooler than you need anyway, and the TX3 will be a better match.
I built two systems up with a Raidmax Smilodon mid-tower case, and I had to take the fan off the side of the case (on the door) to make this cooler fit. I knew that going in - so if you have a Raidmax Smilodon, realize that nice blue LED fan on the clear door may have to be moved to a new location. I moved this LED fan to the bar below where it originally was, and removed the fan without the LED. That way I still had the cool color!
In summary, a highly recommended fan, great product! Just make sure it will fit in your case before you buy it!
Thanks for reading.