Creative Labs Sound Blaster Digital I/O Module Gris adaptador de cable - Adaptador para cable (Gris)
Descripción del producto
Color del producto: Gris
Productos compatibles: Sound Blaster X-Fi Elite Pro.\nSound Blaster X-Fi Fatal1ty FPS.\nSound Blaster X-Fi Platinum.\nSound Blaster X-Fi XtremeGamer Fatal1ty Professional Series.\nSound Blaster X-Fi XtremeMusic.\nSound Blaster X-Fi Xtreme Audio.\nSound Blaster Audigy 4.\nSound Blaster Audigy 2 Value.\nSound Blaster Audigy SE.\nSound Blaster Live! 24 bit.
Puertos de entrada y salida (E/S): Input: Optical and Coaxial\nOutput: Optical and Coaxial
Tipo de género: Macho/Hembra
Opiniones de clientes
|5 estrellas (0%)|
|4 estrellas (0%)|
|3 estrellas (0%)|
|2 estrellas (0%)|
|1 estrella (0%)|
Opiniones de clientes más útiles en Amazon.com
I'm running Vista so none of the Creative applications work at all -- which isn't a problem in most cases except this one. Visiting Creative's website provided no relevant support.
The bottom line to get the Digital I/O module working is to use Control Panel->Sound. Find your speakers and click Properties. On the Custom tab click Digital Only. The analog speakers will be disabled but the Digital I/O will work.
BTW: If you want to record PC audio connect the coaxial input to the coaxial output and make sure you turn up the input gain to 100%. You can use any sound recorder (including the free one that comes with Vista) to make high quality digital recordings.
Just a warning, as with any digital audio and a PC... you will only get stereo sound in games and other applications unless the game/application supports DTS 5.1 or another format your reciever/decoder supports. Most games do not support this, so you will have to switch between analog and digital signals. If dts is supported and enabled, you will hear sound from all 5 speakers.
Setup: Laptop, Creative Sound Blaster external 24-bit USB break out box, Labtec 4.1 speaker system, Creative Digital I/O device, Xbox 360.
Before I purchased this device, I had been running the audio of my laptop through the Creative Labs USB Sound Blaster MP3+ External Sound Card Sound System Sound Blaster external USB device (please note, the link is to a product that is similar, but not precisely the same model), and out through the Labtec 4.1 speaker system. The external device worked just fine, and didn't have any major problems (with an older driver I couldn't get the device to use any profile other than 'headphones' instead of 4 speakers).
I had hooked my Xbox 360 to a LCD computer monitor via a VGA adapter cable, and ran my audio through the 1/8" jack to the Line In jack on the back of the external USB device. Everything was fine. I had audio from the Xbox coming through the speakers I used for my laptop (granted, no EAX abilities were available, but at least there was sound).
I ordered the Sound Blaster Digital I/O Module hoping that I would be able to use a TOSLink cable to get digital sound from the Xbox. Not the case.
I updated my drivers. I ran the TOSLink from the AV cable of the Xbox to the I/O Module and that was run to Line In 1/8" jack in the back of the external USB device. Turned on the Xbox hoping to have some surround sound love from the I/O module.
Nothing. No sound. No interference noise. Nothing at all.
I tried setting the Xbox to Digital Stereo, Digital Surround, and even the Digital WMA setting for the audio. Still nothing.
After some research and a letter to Creative, I was dismayed to find out that the Sound Blaster Digital I/O module does NOT support digital sound.
Creative's solution was to set the Xbox to Digital Stereo output, and plug the 1/8" jack into the Line In port of the external Sound Blaster device. According to them, even though it wouldn't produce true surround sound, I should be able to use the TOSLink to get sound from the Xbox.
Sorry. That's not the case. I've tried every possible combination that I can think of, and I can't get any sound at all from the Xbox via the I/O device.
It's not an issue of the I/O device not being compatible with the other Creative device that I have. I double checked before making the purchase that it would work with the external device that had. I just can't. Make. It. Work.
So I'm back to using a cheapo Radio Shack 1/8" jack running into the external USB sound card to get audio from the Xbox. So, if by chance, you're trying to use the I/O device to get digital sound output, don't buy this product. It is not capable of carrying a Dolby Digital sound through it.
I honestly don't know why they even make this doohickey, other than to lure in gadget geeks like me.