- Dimensiones del producto: 39,4 x 45 x 14,5 cm ; 7 Kg
- Número de modelo del producto: V11H373120
- ASIN: B0044UHJWY
- Producto en Amazon.es desde: 9 de marzo de 2011
- Valoración media de los clientes: Sé el primero en opinar sobre este producto
Epson PowerLite Home Cinema 8350 - Proyector (248,9 - 530,9 mm (9.8 - 20.9"), 4:3, 16:9, LCD, Manual, 1080p (1920x1080), UHE)
Descripción del producto
Alta Definición Total: Si
Altavoces incorporados: No
Brillo de proyector: 2000 lúmenes ANSI
Cantidad de puertos VGA (D-Sub): 1
Capacidad de zoom: Manual
Color del producto: Gris
Compatibilidad de tamaño de pantalla: 248,9 - 530,9 mm (9.8 - 20.9")
Desplazamiento de lente: 47.1/96.3
Dimensiones (Ancho x Profundidad x Altura): 450 x 394 x 145 mm
Duración de lámpara: 4000 h
Entrada de CA: Si
Entrada de S-Video: 1
Entrada de video compuesto: 1
HD Listo: Si
Intervalo de longitud focal: 22,5 - 47,2 mm
Intervalo de temperatura operativa: 5 - 35 °C
Intervalo focal de lente: 2.0 - 3.17
Montable en el techo: Si
Nivel de ruido: 28 dB
Número de puertos HDMI: 2
Peso: 7,3 kg
Potencia de bombilla: 200 W
Puerto - RS-232: 1
Puerto DVI: No
Relación de aspecto: 4:3, 16:9
Resolución original del proyector: 1080p (1920x1080)
Tecnología de proyección: LCD
Tipo de lámpara: UHE
Tipo de matriz: 3-panel (p-Si TFT activa)
Video componente (YPbPr/YCbCr) entrada: 1
Opiniones de clientes
Opiniones de clientes más útiles en Amazon.com (beta) (Puede incluir opiniones del Programa de Recompensas de Opiniones Iniciales)
I snatched up this projector as soon as I could after it was introduced (October 2010). I felt confident buying a brand new product because this projector is an evolution of the highly regarded 8100 from last year. The 8100 brought 1080P resolution to the mainstream of the home projector market. For the same price or lower, the 8350 improves upon the 8100 in several areas. First, it has inorganic rather than organic LCD panels. This feature suddenly became important to me when my six year old Sanyo PLV-Z2's blue panel gave out. I found out that (eventual) blue panel failure is a common problem with the old Sanyo's organic panels. Inorganic panels are more stable and heat-resistant. In addition to the inorganic panels, the 8350 is brighter than the 8100 and it has a higher contrast ratio (black/white).
Since most people (including me) won't be comparing projectors side-by-side, I'll tell you what's likely to be important to somebody considering a home theater projector purchase. Placement flexibility is very important to home projector buyers on a budget. If you have to pay someone to do a ceiling installation, you can pay half this projector's list price just for the installation. The Epson 8350 has a long 2.1 power zoom lens and vertical and horizontal lens shift. What this means is that you can likely put the projector on a bookcase shelf at the side of a room 10-15 feet away from your projection wall or screen and skip any formal installation whatsoever. The second important feature is brightness. Unlike my old projector, the new Epson is bright enough to project a good picture with room lights on. It can easily substitute for a 60 inch flat panel television, with modest light control measures. With the lights off, you can crank the image up to 200 inches if you have the space. (By the way, I've never bothered with getting a screen. I don't even use a white wall. I project onto a tan wall, and the picture is fine.)
The biggest marketing feature of this projector is its 1080P native resolution. It looks good. I was a little surprised that 1080P didn't make as much of a difference as I expected, but it looks good. I didn't really have to make many changes to the default settings to get a picture of my liking.
I have only used the projector with HDMI input. Other inputs are available - see the product description for details. Kudos to Epson for including a LIGHTED remote. I don't know why all projector remotes aren't lighted. The projector is very quiet. The advertised lamp (bulb) light is 4,000 hours. That will mean several years of use for an average buyer. There is one feature that's not particularly convenient, and that is size. This projector is surprisingly large. You really notice it in the store if it is positioned next to business-class projectors. In the business niche size (small) and light output/dollar are key features. Business projectors don't have the lens shift and zoom flexibility of the 8350. Business projectors typically have lower resolution, and they are louder than the 8350. If you are looking for a projector to carry with you to business meetings and to sometimes use at home for movies there are probably better (lighter and cheaper) choices; however for home use the Epson 8350 is hard to beat.
Finally, I want to remind people who have never purchased a home theater projector that you have to have a source for the picture to be fed to the projector. I use a Playstation3 and a stand-alone HDTV tuner (hard to find except online) plugged into an Onkyo home theater receiver. You should budget for a home theater receiver (receivers with speakers are called "home theater in a box" or HTIB) that has HDMI in and out, preferably at least 3 inputs and 2 outputs. It's best to rig things so that everything goes into the receiver, and then one HDMI cable goes from the receiver to the projector. It is a lot cheaper to get your HDMI cables online.
In conclusion, the Epson 8350 can be thought of as a tweaked "next year's model" of the 8100. Since the 8100 got the core features right, not much improvement was needed. Epson apparently controlled the inventory of the 8100s pretty well. After the 8350 was released, I looked for blow-out deals on the 8100 and didn't find any. You can pay just as much for the outgoing 8100 as the 8350. You might as well get the newer model.
SUPPLEMENT 12/28/2010 - Using a projector for motion gaming.
I've had people ask me how you can use a projector to play Wii games. Remember, with a home theater projector, the projector is (usually) behind you, not in front of you like a television, so you can't put the sensor bar on the projector. The answer is quite simple, and that is to use an audio-video receiver or a dedicated HTIB receiver. You plug the console into the receiver just like you would plug it into your television. The receiver will either be in front of you or close enough to the front that you can run the game's sensor cable to game console without any improvised wiring. Wii games are quite fun blown up to wall size, even though the Wii is not a high definition device. PS3 games and BluRay movies on the Playstation 3 look fantastic. I don't have an XBOX 360, but if you want to give me one, I'll be happy to write about it.
UPDATE 5/17/2011 - FIRST LAMP DIES. My first lamp (bulb) just burnt out. If this becomes a repeated thing, it will justify a lower rating. The lamp had under 700 hours, well under the 4000 hour rating. It seems like the official Epson replacement lamp is hard to find in stock, but I just ordered a third party replacement lamp, the Electrified ELPLP49 / V13H010L49 Replacement Lamp with Housing for Epson Projectors - 150 Day Warranty which is apparently in stock. Once I get a chance to install it, I will update this review.
UPDATE 5/19/2011 Right after I put in the order for the replacement lamp, I remembered reading on AVS Forums that some projector buyers from various manufacturers who experienced premature lamp failure sometimes got goodwill replacements even when the lamps were technically out of warranty. I emailed Epson about the problem, and in less than 24 hours, they responded via email that they would ship a replacement lamp. I'll never know whether Epson was influenced by the fact that I have publicly described my experience with the projector here ever since I got it. I'm sure it didn't hurt. It was a show of good customer service by Epson, nonetheless. I cancelled my Electrified replacement lamp before it shipped. I'll update when I receive the Epson replacement lamp. Remember, whatever projector you buy, if the lamp fails prematurely, go ahead and call or email the manufacturer and ask for a good will replacement. I'm sure you can't go to the well repeatedly, and most of them handle these on a case by case basis.
UPDATE 5/30/2011 Epson promptly sent me a replacement lamp as they promised. I installed it, and it works fine. 5 STARS FOR EPSON CUSTOMER SERVICE on this. The lamp wasn't technically under warranty but they replaced it as a customer satisfaction gesture. In comparison, the last time I had to call Sony about a warranty repair, they gave me the third degree.
Update Sept 2015: I sent this to an Epson authorized repair center, because the temporary fix I tried only worked a couple days. The repair shop told me the main motherboard is the problem, and Epson charges $1200 for them - almost the same price as a new projector! So it's not worth repairing basically, and is headed for the trash bin. Really ridiculous that a $1200+ piece of equipment that was very well cared for (and still on the first bulb) only lasted 3 years.
It appears that either the auto iris component or optical filter has failed. If you do an Internet or Youtube search you'll find auto iris failure is very common in these Epson projectors (other similar models too). Expensive projectors shouldn't just have parts breaking after a couple years - bulb replacement is expected, but wide spread reports of an internal component failing even when the projector was well cared for indicate a product defect / quality issue.
It's very hard to get repaired, and Epson customer support isn't helpful. They said they couldn't help me because it was out of warranty, and gave me a number for the closest service center, in Vancouver, WA (not really close to Seattle). I could ship it, but it might get damaged in shipping, the shipping and repair would be expensive, and I'd have no TV for probably two weeks.
So I decided to try fixing it myself - the auto iris component is pretty simple, and I'm good at taking things apart and putting them back together (I don't recommend trying this if you're not).
There's a parts diagram here:
The auto iris is part # B0450 on page 3.
These were the best instructions I found:
So far it appears just inspecting + reassembling the auto iris has partially fixed my problem - the projector works now, but sometimes still makes a rattling / ratcheting sound upon boot. So it may break again, but at least the cheap, homemade fix may get some more life out of it.
I had one legitimate bulb death at about 2-3 years in. Things got darker and darker until it was obvious something was wrong. A replacement bulb from Epson was over 300 dollars, but you don't want to compromise on quality right? Continue on and you'll see why I started buying third party bulbs from Amazon instead...
However great it is, it suffers from the "Auto-Iris error" where when turning on, all you get is a blue screen with a yellow box informing you of an issue with the auto-iris. You might think "I'm not using the auto iris" but that doesn't matter. Turning it off and on brings it back. Maybe you give it a minute and it boots up normally, but it comes back. It always comes back.
So you get clever. Perhaps you take out the filter. Oh, it works for a month or three. Then it comes back. So you buy a new filter, goes away. Comes back, filter swaps stop working. You consider replacing the bulb, which upside down on a ladder when you were ready to watch a movie is quite an awful experience. And then the bulb doesn't fully engage, you and fighting it and it eventually settles. And then auto iris errors a few days later. At this point, I expect an error every few months and try to stave it off with 2 minute power offs (power off the unit via button, flick the power switch off, pull power), filter changes, and a bulb change. I keep two bulbs (GLAMPS ELPLP49 / V13H010L49 Replacement Compatible Projector Housing for EPSON PowerLite Home Cinema 6100/6500UB/8100/8350/8500UB/8700UB) and two filters (Air Filter, for Powerlite HC6100/) ready to swap out.
I work in IT, I can deal with this. My wife can't fix it if it happens and I'm gone. I don't want to have to deal with it after a hard day. It's just not worth the effort. Before this problem, it was a 5 star purchase. Nowadays, I'd only deal with this if it was a cheap buy. But you know what, apparently it is 100 dollars more than what I paid in 2011 for it? What? Go buy a different model. Maybe Epson is still great, but this model has some serious issues.
Both project excellent images, but the 8700UB offered little more than marketing hype. That’s what I ended up getting, but I never realized I had simply thrown away my money until I replaced it with this 8350. The 8700UB is no longer being manufactured, but they are still on the shelves. Don’t buy one thinking you are getting something that is much improved. It’s just not. There’s nothing there that improves significantly on this 8350. The picture quality of both more than meet my expectations for a home theater.
People are right about the bulb life. They don’t last anywhere near as advertised, but you can buy cheaper bulbs for a tenth of the price now, so I won’t complain about that too much. They are easy to replace.
I love my home theater. The picture quality still surprises me after 4 years. It’s like going to a movie theater. The effect is stunning.