Lansky Sharpeners LKDMD a... se ha añadido a la cesta

Lansky Sharpeners LKDMD afilador de cuchillo - Afilador de cuchillos (Multi)

4.0 de un máximo de 5 estrellas 1 opinión de cliente

Precio: EUR 105,13 Envío GRATIS en 4 a 5 días o envío más rápido GRATIS con Amazon Premium
Precio final del producto
Sólo queda(n) 1 en stock (hay más unidades en camino).
Vendido y enviado por Amazon. Se puede envolver para regalo.
Nuevos: 5 desde EUR 90,28
  • Con hoja fija

Advertencia: prohibida su venta a menores de 18 años.


Descripción del producto

Otras características:
Color del producto: Multi


Descripción técnica

Información sobre el producto
ColorMulti
Altura1.5 pulgadas
Longitud5 pulgadas
Anchura2 pulgadas
Número de piezas1
Incluye bateríasNo
MarcaLANSKY SHARPENERS

Detalles del producto

  • Dimensiones del producto: 25,4 x 24,9 x 4,3 cm ; 744 g
  • Número de modelo del producto: LKDMD
  • ASIN: B000B8L6LS
  • Producto en Amazon.es desde: 14 de marzo de 2013
  • Valoración media de los clientes: 4.0 de un máximo de 5 estrellas  Ver todas las opiniones (1 opinión de cliente)
  • Clasificación en los más vendidos de Amazon: nº58.613 en Deportes y aire libre (Ver el Top 100 en Deportes y aire libre)
  • Si eres el vendedor de este producto, ¿te gustaría sugerir ciertos cambios a través del servicio de atención al vendedor?


Preguntas y respuestas de los clientes

Opiniones de clientes

4.0 de un máximo de 5 estrellas
5 estrellas
0
4 estrellas
1
3 estrellas
0
2 estrellas
0
1 estrella
0
Ver opinión de cliente
Comparte tu opinión con otros clientes

Principales opiniones de clientes

Compra verificada
Buen afilador, cumple su funcion aunque hay que practicar para conseguir un buen acabado. Un poco caro para lo que duran las piedras.
Comentario ¿Esta opinión te ha parecido útil? No Enviando comentario...
Gracias por tu opinión.
Lo sentimos, no hemos podido registrar tu voto. Vuelva a intentarlo
Informar de un abuso

Opiniones de clientes más útiles en Amazon.com (beta)

Amazon.com: 4.2 de un máximo de 5 estrellas 395 opiniones
8 de 8 personas piensan que la opinión es útil
1.0 de un máximo de 5 estrellas I feel like I wasted $55 that instead could be spent into ... 4 de enero de 2015
Por J. C. Carneiro - Publicado en Amazon.com
Compra verificada
Just my short review as it fell bellow my expectations. I followed every guide available and apparently for my use (sharpening edc small blades with less than 20° angles) it is basically a hasle and unreliable.

1) 17° angle is unusuable with the screws provided. The stone hits the screw top and is impossible to use without modifications. I bought this to use at this angles and it is impossible.

2) Quality is cheap, not worth $55. The clamp wont hold the blade well enough without adding a rubber strip or tape, the whole thing is just a hassle to use. I feel like I wasted $55 that instead could be spent into something like a wicked edge.

3) For bigger blades it is also a hassle, it wont reach all the blade lenght and I am not talking about hunters knifes, just a tad longer than usual 5".

Overall, I am pretty sure some people will say this kit worked for them, I have to say it doesnt for me out of the box. I didnt buy to make mods or have a big hassle when other systems are better designed. Also the result is unreliable, depending on lots of factors (correct blade position on clamp or it will slip or not close, guide rod alignment, screw in the way, not reaching all blade etc). At this point I rather have returned and spent the money in something else or a professional to sharpen my knifes.
5 de 5 personas piensan que la opinión es útil
1.0 de un máximo de 5 estrellas Poorly made, and Amazon will NOT ALLOW RETURNS 12 de septiembre de 2015
Por doitbetter - Publicado en Amazon.com
Compra verificada
I found the hole for the screw that tightens the clamp not tapped all the way through and therefore the screw would not go in. The screw itself had burs on the threads making it more difficult to use. The picture showed a metal headed screw that stands off the surface enough to grip. The one I got had almost flat plastic headed screws that were very difficult to grip, especially the one that tightens the clamp which sits in a depression also. I was unable to adequately clamp my first knife and make it secure without using too much of the blade which made it impossible to use the 17 or 20 degree slots as the hone would hit the clamp before the knife. This will not work on narrow blades at all. After working to find an adequate clamping, I looked at the proximity of my hand and fingers to the blade and feel that this is a dangerous operation and prone to lacerations of the hand. Additionally, when I tried to return this, Amazon will NOT ALLOW RETURNS. You must contact the retailer directly. I have done that and am waiting for a response.
13 de 13 personas piensan que la opinión es útil
1.0 de un máximo de 5 estrellas Nothing like the old one 24 de enero de 2014
Por Rod D. - Publicado en Amazon.com
Compra verificada
I have a Lansky Diamond sharpener I got about 15 years ago, and the diamonds finally were completely gone, so I was just going to replace them, but I bought a whole new unit. I was very dissapointed. the knife holder dosn't hold! It is very weak, and the knife moves around. The new sharpner unit is not the quality the old one was. I just hope the diamonds last as long, but i'm really not expecting that. I now use the old holder,and the new diamonds. Would not reccomend this unit. Rod
2 de 2 personas piensan que la opinión es útil
4.0 de un máximo de 5 estrellas or any of the new extra hard steels" you will need a diamond kit like this one 8 de diciembre de 2016
Por Steven Holtzman - Publicado en Amazon.com
Compra verificada
This is not my first Lansky, in fact I have completely worn out one throughout the years. There is an important point to consider if you want one of these and that is what kind of steel am I sharpening? If you have knives with "SV30, 154, D1, or any of the new extra hard steels" you will need a diamond kit like this one. The stone surface (diamond grit) is harder than the steel and it will remove material needed to reshape and sharpen the blade. The regular stones will not remove as much steel and also wear quicker making the surface of the stone uneven and ruining your hard work. The reason for 4 stars is the blade holder or clamp, it is difficult to properly locate the clamp and provide sufficient force to keep the blade from moving during the sharpening process. If you decide to use this system I strongly recommend you buy the mounting base or table clamp it will make your job much faster.
3.0 de un máximo de 5 estrellas A solid sharpening system, but design could be MUCH more practical! 11 de febrero de 2017
Por TRL - Publicado en Amazon.com
Compra verificada
This is a solid sharpening system that gets it about 80% right. I have been researching and using various sharpening systems for more than a year now (everything from low-tech whetstones to high-tech electronic power tool sharpeners), and the Lansky system fits nicely in the middle of that spectrum. There are some major flaws, however (read below).

PROS:

- Allows for "custom" sharpening of a given knife, beyond what other systems with limited sharpening angles or grits provide.
- The whole kit has a small footprint and can store nicely.
- Components allow for easy swap/replacement of parts.

CONS:

- This is the real mind-boggler.... Great sharpening is almost ENTIRELY about keeping the right ANGLE. That is the very "pitch" on which this product relies: proper-angled sharpening. For the life of me, I cannot decide why Lansky thought it was a good idea to create a system wherein you have to screw in a flimsy metal guide bar to a separate sharpening section. This allows for a huge "flex point" in a system that is based on maintaining a precise angle of use! The screw that holds these two pieces together merely works on pressure (it does not thread into the sharpening piece) and is thus subject to serious fluctuation during use. This could have EASILY been made into one, uniform piece, ensuring a precise angle throughout sharpening.

- For larger knives (e.g. anything longer than about 5-6 inches, the system is going to need to be adjusted very frequently to handle the entire length of the blade. It's really rather small.

- B/c of the importance of the sharpening angle (noted above), it's extremely difficult to ensure that the angle guide bar and the sharpening piece are level. Lansky says to use only "finger pressure" to straighten the guide bar, but this is woefully impractical.

- Sharpening many knives, especially those that are worn, larger, or need re-angled, can be a lot of work. Sore wrists and blisters can be expected if you have a whole set of knives to deal with.

- The fact that Lansky makes you buy the little stand component separately (even though they pre-arranged the kit to securely store that piece in the box) is a joke. The stand should be included in the basic package (sharpening without it is rather impractical in many cases), and at the end of the day, the stand is of rather poor construction anyway.