Minwax 15200 12.25 Oz Clear Gloss Cepillado Laca Spray - Pack de 6
¿Tienes alguna pregunta?
Encuentra respuestas en la información del producto, en preguntas y respuestas y en reseñas.
Asegúrate de haber introducido una pregunta válida. Podrás editar tu pregunta o publicación.
Descripción del producto
-Aerosol de laca laca transparente cepillado es un hermoso acabado, protector para madera y metal Ideal para superficies de madera de interior Se puede usar sobre madera desnuda o te-ido Seca al tacto en 30 minutos Para el uso en la artesan-a en madera, armarios, muebles, puertas interiores, y accesorios Aplicar con alta calidad de cerdas naturales Limpiar con diluyente de laca Cubre 125 pies cuadrados por cuarto Transparente brillante Longitud: 2.63 Ancho: 2.63 Altura: 8
Opiniones de clientes
|5 estrellas (0%)|
|4 estrellas (0%)|
|3 estrellas (0%)|
|2 estrellas (0%)|
|1 estrella (0%)|
Opiniones de clientes más útiles en Amazon.com
Great overall results, as you can see in the pictures. I didn't have any trouble with it running - just be sure to do thin spray coats with a nice sweeping spray motion. The tip is adjustable so you can get a vertical or horizontal spray pattern. Once finished, I didn't really even see a need to wet sand it afterwards as I wasn't looking for a wildly high-gloss mirror-like finish. I was able to do 6 coats with one can, although I might have been spraying a bit farther away than I needed to - probably closer to 10-12 inches rather than the recommended 6-10.
Mine is for an outdoor bench that has only been stained. Lacquer is like putting on a tarp, only better.
Very EZ to do. You don't need to send it to a restoration wood shop. $$$
First, test you skill on the bottom where no one will see it. Nice EZ strokes about 8 to 10 inches away from the wood.
Spray several light coats (heavy coats are not better...they run and bubble) Let dry for about 30 minutes between coats.
After the last coat is applied, let it totally dry for 24 hours.
Don't be intimidated. This is pretty EZ to do.
Packaging: A note to Amazon. The cans were loose in a box and rolled around. One cap was cracked. But not a big deal
Remember this is a nitrocellulose lacquer so you can't put your guitar in a regular guitar stand with the foam on the arms. The foam is petroleum based and will slowly react with the finish, dulling it or softening it. It can get pretty ugly if your guitar sits against the foam. Tip: wrap the foam with black gaffers tape and you'll be good to go!
If you want something a little clearer, the Watco stuff from Home Depot is the way to go.