Viewsonic VX2753MH-LED- Monitor LED de Computadora, 27 pulgadas, Full HD
Hay un nuevo modelo de este producto:
Descripción del producto
Ajuste de la inclinación: Si
Ajustes de altura: No
Altavoces incorporados: Si
Altura del paquete: 55,5 cm
Ancho: 65,8 cm
Ancho del dispositivo (con soporte): 65,8 cm
Ancho del paquete: 73 cm
Brillo de pantalla: 300 cd / m²
Cables incluidos: Audio (3.5mm), HDMI, VGA
Cantidad de puertos VGA (D-Sub): 1
Certificación: UL, cUL, FCC-B, CB, NOM, GS (covers GS), ERGO (ISO13406-2 &MPR II), MPR II, GOST-R + 20 original copies hygienic, SASO, PCBC, VCCI, BSMI, CCC, PSB, C-TICK, MIC (KCC), WEEE, RoHS
Certificado Energy Star: Si
Clase de eficiencia de energía: Sin especificar
Cliente delgado instalado: No
Color del producto: Negro
Conformidad EPEAT: Plata
Consumo energético: 20 W
Cámara incorporada: No
Diagonal de la pantalla: 68,6 cm (27")
Entrada de CA: Si
Exhibición en pantalla (OSD): Si
Formatos gráficos soportados: 1920 x 1080 (HD 1080)
Frecuencia de entrada AC: 50/60 Hz
Guía de configuración rápida: Si
Húmedad relativa: 20 - 90%
Interruptor de encendido/apagado integrado: Si
Intervalo de escaneado horizontal: 24 - 82 kHz
Intervalo de escaneado vertical: 50 - 75 Hz
Intervalo de temperatura operativa: 0 - 40 °C
LED de energía: Si
LED de suspendido: Si
Número de altavoces: 2
Número de puertos HDMI: 2
Peso con stand: 4,7 kg
Peso del paquete: 7,8 kg
Potencia estimada RMS: 2 W
Profundidad del paquete: 17,6 cm
Ranura para cable de seguridad: No
Razón de contraste (típica): 1200:1
Relación de aspecto: 16:9
Relación de aspecto nativa: 16:9
Relación de contraste (dinámico): 30000000:1
Resolución de la pantalla: 1920 x 1080 Pixeles
Sincronización H/V separada: Si
Sincronización compuesta: Si
Sincronización en verde (SOG): Si
Sintonizador de TV integrado: No
Tiempo de respuesta: 1 ms
Tipo HD: Full HD
Tipo de retroiluminación: W-LED
Voltaje de entrada AC: 100 - 240 V
montaje VESA: No
Ángulo de inclinación: -5 - 20°
Ángulo de visión, horizontal: 170°
Ángulo de visión, vertical: 160°
Opiniones de clientes
Principales opiniones de clientes
Además, la posibilidad de aceptar 2 dispositivos por HDMI + otro por VGA lo convierten en imprescindible para mí
Opiniones de clientes más útiles en Amazon.com (beta)
A. Hooked it up to a desktop system (E4500 Core 2 CPU, XP Sp3, XFX ATI Radeon HD6670 1 GB DDR5 VGA/DVI/HDMI PCI-Express Video Card HD667XZAF3) via D-Sub.
B. Installed the software.
C. Used the interface buttons on the monitor to access the monitor's setup menu and changed it to "PC Mode".
D. Accessed ATI's Catalyst Control Center to change the overscan to 0% - to better fill the viewable space.
E. Went back into the monitor's setup menu and changed the:
* Horizontal Size until the image went corner-to-corner.
* Operation of the front bezel LED to turn off when the panel was in use (a nice feature).
* Brightness and contrast settings to yield a more pleasing image.
* LCD response time to Advanced.
F. Switched to the included HDMI Cable.
The results were well delineated text (without adjusting Microsoft's ClearType text), smooth motion, good contrast, very nice detail and an overall image that popped when source material was up to it (and I haven't adjusted Fine Tune and Sharpness yet)!
Though I have the front bezel LED turned off when the panel is in use, it does glow a brighter than needed amber when the monitor is in standby. So with a reasonable disdain for needless light pollution from equipment in my environment, I used a Sharpie along the bottom surface of the LED fascia which dimmed output by roughly 50%. That notwithstanding, a design team more on the ball would have made it dimmable in user-selectable steps.
It's interesting to note that when a Dell XPS15 Laptop was connected to the ViewSonic, the image was somewhat faded compared to the XPS' 1080P panel (or the XFX desktop video card for that matter); however a few adjustments took care of that in short order. Speaking of laptops and ViewSonic monitors: the home and the work laptops (both I7-2620M CPU Win7 64 machines from different manufacturers) use Intel's HD 3000 integrated video hardware and kick over to an Nvidia adapter when needed. On the work PC/VA2431 monitor combination I needed to make adjustments to ClearType text so characters appeared as anomaly free as possible. The VX2753' on the other hand needed no such adjustment from either the home desktop or laptop with text looking so far the best I've seen.
Also noteworthy is when I tested for video judder at home (desktop) and work (laptop) using VLC Media Player and The Incredibles, the number of occurrences was unfortunately way too high; and with the VLC too unstable in both locations: I uninstalled it. In both locations I installed the Essentials Codec Pack (free @ mediacodec.org) and (with that came) Media Player Classic - Home Cinema Player; and though judder through MPC-HC or Windows Media Player (which couldn't play a movie until I installed the codec pack) was greatly reduced, it still happened on the home desktop. Using either player on the work PC after the ECP install and the problem was gone almost entirely. It wasn't until I switched to an old standby of PowerDVD 7 at home that the movie looked as good (lack of judder-wise) as the work PC running either MPC-HC or WMP. Though I haven't tried testing movies on the Dell Laptop, I realized the judder problems were not attributable to the monitor at a 60Hz refresh rate.
What I'm getting at is this: any display problems attributed to a correctly operating VX2753' will boil down to: user error and/or upstream hardware/software issues - not the monitor.
1. If installed, the included software seems nothing more than wasted drive space as the "drivers" appear to be useless and a monitor configuration utility is not included.
2. Because of the above, one relies on the menu buttons which are harder to press than needed and provides little in the way of tactile differentiation.
3. Unfortunately those buttons are on the right side bezel, so those wanting two or more of the monitors side-by-side, will find menu access more inconvenient; therefore, they should've been placed on the bottom bezel.
4. Certain features (Horizontal Size, Fine Tune, etc.) are only available when using a D-Sub Cable.
5. From what little I saw of it, the dynamic contrast is detrimental...
6. The front LED is a bit bright though it's easily fixed.
7. The large and unnecessary HDMI lettering on the front bezel (fortunately becomes mostly innocuous when using the monitor).
8. The speakers are somewhere just above two cans and a string.
9. As a discerning product designer and user, it's easy to see that the lettering, LED, software, button placement and functionality are hits an otherwise outstanding product takes when less than talented product team members spill their lack of ability on it. Therefore there's a corresponding hit on pride of ownership.
1. Due to the screen size, it's easy to read two documents side-by-side.
2. No dead pixels.
3. Panel can be supported via stand or "kickstand".
4. The base connects securely to the "kickstand" via wing nut.
5. The stand is very supportive and stable.
6. No back-light bleed.
7. Evenly lit across the panel.
8. Imparts a great deal of graphics detail.
9. Text is extremely crisp and evenly rendered.
10. Selectable LCD Response Time (VS quotes the time it takes a pixel to go from black to white to black [in milliseconds], which is more stringent than the common G2G [gray-to-gray in milliseconds]).
11. At the "Advanced" (2ms?) LCD response setting, motion is very linear without artifacts that I can detect.
12. Front bezel LED can be configured to turn off when the panel is in use.
13. Due to LED backlighting and associated circuitry driving the panel, this model (according to the website) typically consumes 20 watts (presumably when in use as opposed to an average of in-use and standby times); however, the manual states 36 watts.
14. Uses less than 1 watt in Standby.
15. The panel can tilt forward 5 degrees (helpful in my setup).
16. 1200:1 contrast ratio is the best spec. I've seen for 27" panels.
17. One of the brighter panels at 300 cd/m2.
18. Very good color saturation.
19. Relatively light weight.
20. HDMI and D-Sub cables come with it.
21. Surprisingly the HDMI Cable fits snuggly at both ends.
22. Very good viewing angles for a TN panel.
23. 3 year warranty.
24. Generates very little heat.
25. Mac compatible.
26. Considering all of the above, it may be one of the best 27" 1080P monitors under $1,000.00. It is so good at rendering text, graphics and motion, that those considering spending much more may think twice about their prospective purchase after reading this and/or seeing one setup to their liking.
With the quest over and the novelty of having upgraded from a 19" Samsung to the 27" ViewSonic still intact, some very cool free software was put into service. First the desktop was cleared of any icons, and RocketDock was installed (RocketDock.Com) along with icons I chose from their site. Next I downloaded Wallpaper Cycler Lite (Download.CNET.Com), made a few categories, then sourced some excellent (and also free) HD wallpaper from HDwallpapers.In and Desktopnexus.Com. With RocketDock and the XP Taskbar set to auto-hide, the rest is unfettered HD eye candy - once a minute - until the PC is needed or put in standby.
Enjoy your monitor.
If you use RGB format, black will be just dark gray. So use YCbCr444 mode. If you have a nvidia card, go to nvidia control panel - adjust desktop color settings - digital color format and choose YCbCr44. Then under the monitor's control menu go to manual image adjust - display mode and choose YUV mode.
key words hopping that some people can find this review: (Viewsonic VX2453MH-LED 24-Inch, washed out, image, better, contrast, black, backlight, leaking, bad, annoying)
That said, keep in mind that first and foremost you are purchasing an LCD monitor. Its true purpose is to display your desktop, images, videos and etc from your computer (or your Xbox 360, PS3, Blu-Ray player and etc), not to play sound. In that realm, as far as 24" monitors go from what I have seen and used, this is simply the best I have seen when compared to displays from vendors such as ASUS and Apple. The colours are extremely vivid and the viewing angles are very nice (can see movies/games from the extreme sides). The back-lighting is perfectly balanced, non-bleeding and it is great for watching HD movies as well as playing games or doing standard web browsing. It is also extremely thin and light despite being 24".
In short, if you are considering buying this monitor; do.
The Viewsonic was my final choice, after reading tons of reviews both here and on the vendor website.
The monitor arrived shortly and within 10 minutes I had it up and running in full and gorgeous 1920x1080. The monitor is light and easy to setup - the base is packed separately and installs with a twist of the wing screw. It's a sturdy base, square shaped, and it fits nicely on my desk.
My current computer system has DVI plugs on the video card, so I did have to purchase a companion product (I chose the 15ft Premium HDMI to DVI Cable). The cable is PLENTY long to reach around my desk, and with a snap it was plugged in. Just because this monitor includes 2 HDMI inputs, and a VGA input but no DVI, I dropped a star. I didn't really want to buy yet another cable to connect things...I would have preferred full compatibility.
The monitor itself is gorgeous - the colours are represented very well, and after spending some time in my NVIDIA control panel I had the gamma and contrast (etc.) adjusted exactly where I wanted it. Then it was time to test it in a game!
I am a big Dragon Age fan...so I loaded up Dragon Age II and got started. Colours were gorgeous - very responsive to game play...and if you play the game you know that during a fight there is a LOT going on across the screen...especially with multiple mages and AOE. So that was my primary test.
In all other areas (office applications, general explorer use) it was snappy, crisp, and again the colour looked great. For the first time in about 5 years, I actually am using a background wallpaper now instead of black...just because it's so pretty!
Visually the monitor casing itself has a LOT of text on it. there's the viewsonic brand name, 1080p full hd, a big "HDMI" with the acronym spelled out below it (seriously??), and big blocky "LED" that actually looks cute because of the font....three toucans stamped into the upper left...and then of course the menu buttons on the right side.
Exploring the monitor's hardware menu is easy to do, and you can select different inputs very quickly, as well as adjust all your bright/con/colour/etc settings.
Overall - the monitor is really quite HUGE and fits all the windows I need it to fit. Cool LED technology and super-fast response time...great monitor for a great price. 4 stars.
Cons (and these I expected):
Stand isn't adjustable vertically
Speakers sound terrible. (tinny, which is to be expected on a monitor this skinny)
There's a gotcha I experienced hooking up my Macbook Pro via a Display Port to HDMI adapter. At first, choosing the 1080p resolution produces an image that's too large for the screen - that is the edges are chopped off. Adjusting the under/overscan slider makes it fit, but at the expense of being fuzzy. The solution is in the monitor's setting, under input select, each HDMI input has an AV/PC setting. Mine were set to AV by default. Switching that to PC made the image fit perfectly with no fuzzies.